2010.06.10
1update MP_Toolfix d bug for AutoRun.
2010.05.31
1.޸3D1D CLOCK 00 00
2010.05.28
1.0526
2010.05.26
1.page modeISP ȶ⣻
2.sec  mode ISP 4D2E format fail
3.3D2E flash pret fail⣬FORCE 5T2F flash option 0x26
2010.05.21
1.5D2F flash option26
2.޸
3.hynix 128MB option20

2010.05.13
force 3d2e flash   toshibaaddr,toshiba command option 23
2010.05.07
1.data base ɾ
2.޸tool exe clock
2010.05.05
1.support 6D2F flash modify only data base
2.modify 98 D5 94 BA CLOCK 90 90
2010.05.04
˰汾ȵsorting
1.support sansung C die flash
2.support TC58NVGOS3ETA00 flash

2010.04.30
1update database(98 D3 84 32);
2010.04.16
1.޸toshiba data base osc clock
2.MPTool
3.CE Pretest codeISP code
4.Toshiba 1planeǿΪsamsung address mode
2010.04.15
1. 2CE L63A FLASH Լtime out Ĵ
2.toshiba one plane option Ϊ 0x26
2010.04.13
 2CE L63A FLASH ͸񿪿  ޸CE ON AND OFFĿ
2010.04.13
 2CE L63A FLASH 
SUPPORT ID 0x45,0xF1,0x84,0x95  FLASH
2010.03.25
޸3211BC1 3FF block 
2010.03.22
HYNIX 256MB SLC  FAIL
downgrad MPTOOL ERASR ALL BLOCK AND ERASE GOOD BLOCK SLECT
2010.03.09
SEC 0 Ĺ̶⣬޸Ĺ
2010.03.04
1.support L74 flash
2.support ID 0x98,0xDE,0x95,0x32 flash
3.fix a bug of еSEC ǻ һBUG
4.޸SECISP code PORT  
2010.02.03
1.֧BC2λ SEC MODE flash BC1ӲDOWN ISP 
2010.02.03
1.CE0ǻBUG
2.֧SEC0 BAD
2010.02.02
1.flash id 2c d7 94 3e flash ce0 ֧
2009.01.29
1Fix a bug in pretest.(pretest code)
2010.01.27
1update data base to support Micron(2C D3 90 2E) flash.(Data base)
2fix a bug for page 256 in sector mode.(ISP)
2010.01.25
1.update sorting PAGE MODE ѡ
2010.01.22
1add two new parameters(sector Bad bound and improve bad block count per mu)(mptool and pretest code)
2010.01.20
1support TC58NVG5D2FTAIO flash
2support H27UBG8T2A flash
3MODIFY Auto_Ale.H page256 set address
4update sector mode flash isp bin
2010.01.20
1fix a bug for toshiba flash default cardmode addr(preautof.c);
2fix a bug for ispwrite function;
2010.01.15
1fix a bug for ChipGenius Tool can't recognize the PID &Serial Number;
2update MP_Tool for MUti Language. 
2010.01.14
1.fix the bug of micron 4ce flash force strong page is special2
2.ӳRBĵȴʱ;
3.ignore read fail while serial num is zero and fill up new pages with zero
2010.01.07
1modify o_pret sorting method(MU-BLK-P);
2010.01.07
1ӳRBĵȴʱ;
2Do not always use copy back for 8K flash(see 2009.12.28 )
3modify setor mode performance;
4add to support M61 Flash(2C 28 00 26);
2010.01.04
1fix the HDD issue
2009.12.31
1fix a bug of build link table;
2fix the RB Timeout issue;
3improve the sorting method(do not care the fail mu).
2009.12.29
1update the MP_Tool.
2009.12.28
1Set Copy Back flag for Page 8K flash.(pretest and ISP)
2009.12.25
1Fix a bug in mark bad isp.(ISP)
2009.12.18
1Add new ID.(database and pretest)
2fix a bug in Format.(pretest)
2009.12.16
1Fix a bug which cause h2test fail without marking bad blocks.(ISP)
2009.12.09
1Fix a bug for 2plane.(pretest)
2009.12.07
1Fix a bug for page 8K.(pretest)
2Update card mode for toshiba 6D2E flash.(pretest)
2009.12.07
1add Read Only function (fix a isp bug);
2make uinit.bin save in strong page;
2009.12.04
1fix a isp code bug(޷д볧Ϣ)
2009.12.01
1open open_short_test for original.(mptool_I1201_V2.02.05v3)
2Fix a bug in download parameters.(mptool_I1201_V2.02.05v4)
2009.11.30
1Fix a bug in showing mode.(mptool_I1130_V2.02.05v3)
2Fix a bug in showing color.(mptool_I1130_V2.02.05v3)
3add two new input parameters for downgrade.(pretest and mptool_I1130_V2.02.05v3)
4open open_short_test for downgrade,close open_short_test for original.(mptool_I1130_V2.02.05v3)
2009.11.26
1Add a new parameter,Erase_All_Block,for originalLev11 and Lev12(pretest code)
2Fix a bug in open short test.(open short test code)
3close open short function.(MPTool I1126 V1)
4Fix a bug whick cause errors in detecting L63A Flash ID.(MPTool I1126 V1)
2009.11.25
1close power cycle function in downgrade(ISP code)
2009.11.24
1add open short test.(mptool I1124_V1)
2download parameters no matter downgrade or original.(mptool I1124_V2)
3open power cycle function.(ISP code)
4fix a bug for open short test.(mptool I1124_V2)
5select downgrade mode in "Setting",if you want to use open short test function.
2009.11.23
1add open_short function in "Others Setting".(mptool and code)
2update database to support new flash.(MT29F128G08TAA and some sandisk flashes)(mptool and pretest)
3download a short ISP code to get the address of ISP block.(mptool and code)
2009.11.20
1add the whole mode ;
2009.11.09
1add "erase all block" input parameter in "Setting".(mptool)
2009.09.28
1add lev09
2009.09.23
1update MP_Tool can auto scan BC and BC1
2009.0909
1Update ISP and Pretest to support Hynix 41nm Flash with single plane.
2Don't support 8K 2plane.
2009.09.03
1update to support orginal flash.
2009.08.27
1Fix a bug in ISP writeclean mother and clean fat for 8K 1 plane.
2009.08.26
1Update ISP code for 8K flash with page mode. Not support 8K 2plane.
2Update mp tool.
2009.08.18
1update MP_Tool ,ignore badblockoversetting;
2update DBF file.
2009.08.11
1fix a bug of pretest SectorA=0.
2. Supported Original flash(support 2plane and intinlve).
2009.08.04
1Modify definition of RandomSeed addr in a more friendly way
2Only write 55-aa for spare area of sector 0
2009.07.31
1Change pattern of random generator.
2write 55-aa for any sector while writing pattern
3remove support of any page mode
2009.07.30
1Change clk of l62,l63,T43nm to 90 in dbf file.
2Make pattern the same with SD.
2009.07.21
1fix a bug of set the wrong ignore status of ISP.
2enhance sorting for any mode.
3get ecc mode from mptool
2009.07.20
1Let all scan modes OK. 
2Fix a bug of preformating.
3Fix some bugs of ISP.
2009.07.13
1add 8k and 256 page support. 8k is only supported with scan mode 2 now. 
2009.07.03
1add 256 page support for original flash (only ISP)
2009.06.30
1fix a bug of 3211 original pretest
2009.06.25
1add 3211 pretest and isp bin
2009.06.18
1update SM3252bb Level07.
2009.06.12
1update SM3251AB/BA Level07(this version is the same as I0316's version,but will chk spr0==0 or    other),Level08,Level10,Level11,Level15;(will chk spr0==0 or other)
2update SM3252BB Level07;(will chk spr0==0 or other)
3update SM3252BB isp code about static capacity;
2009.5.21//Tiger
1add level07 for 3252C.(same with level07, but only run 1 plane mode)
2009.5.20//Tiger
1add level06 for 3252C.(normal scan + multi times weakpage scan. If full capacity,run 1 plane.If half capacity,run 2 plane)
2009.05.25
1Close Inteleve Mode (isp&pretest) for Toshiba 43nm:update level09,level99 and isp code;
2009.05.12
1update MP_Tool :when select Level99 will match Toshiba 43nm isp code.
2009.05.11
1add level99 for Toshiba 43nm flash;
2009.04.27
1fix a bug of DG code when half capacity flash  in windows2000 system can't format(close wear-leveling code in    uinit() function),update DG isp code;
2009.04.22
1add level08(like Alcor)
2009.04.20
1fix level07,if erase fail will mark bad;
2fix FLASHID=2C D7 94 3E flash,w/r clk to 90;
2009.04.01
1 fix Level89,add more weak page
2009.03.20
1fixed level07&level89 for Intel 34nm:if bad block numbers is more than 352(1plane) or 176(2plane) in first W/R,it will check ecc bit in the following operation.
2009.03.17
1MP_tool adds the function about Level81~Level90 load 2 plane isp code.
2change I0316 version's Level90 to Level89(pretest and isp are both run 2plane);
3change I0316 version's Level8 to Level88(pretest runs single plane,and isp runs 2plane);
4add level90(this level is just load the info block's bad info,and run 2plane);
5ignore erase and program fail in isp code;
6fixed Level1~Level100(except level09),when save info block,saved level and eccbit info;
2009.03.16
1add SM3252B folder for Toshiba 43nm ForceID
2009.03.15
1for level90,will read status when write one page;
2change level07(just like level11 but will rewrite some weakpage),run single plane;
3add level08,run single plane to do pretest,and ISP code runs 2plane;
2009.03.14
1write weak page again for Level90;
2run single plane to erase for Level90;
3add level07 for Intel34nm ,run single plane.
2009.03.11
1fixed a bug of level03(SM325A/B);
2add level06(pattern is 0x55,0xaa);
2009.03.10
1Change the R/W clk from 00 to 90 for  Intel 34nm DG Flash ;
2Change Level90 to support Intel 34nm DG Flash(it will run 2 plane mode to scan the flash);
2009.03.06
1For SM3252A DG Flash ,change Level12 to Level15;
2009.03.05
1Modify Level80 pretest code,it writes 3 times and the last just for the odd page;
2009.03.03
1add SM325AC Level80 to support AGAND DownGrade FLASH;
2Modify SM325AC DownGrade isp code;
2009.03.02
1add orginal bin file to support AGAND FLASH;
2009.02.13
1Modify the clk from 00 to 80 for Mrcion 34nm;
2Add level05 for Mrcion 34nm;
2009.02.09
1 extend the pretest time out to 60 mins.
2009.02.08
1Modify level90 run 2plane just mark the orginal bad block;
2Modify level100 run single plane just mark the orginal bad block;
2009.01.16
1Modify level02&level03 ,all the program action is running two plane mode to improve the speed;
2Modify level09 for Toshiba 43nm ,the reserve block change to 10;
2009.01.14
1level02 is from level01 for Mrcion;
2level03 is from level01 for Intel;
2009.01.07
1fix a bug of pretest code;
2008.12.31
1add Mrion 34nm
2008.12.25
1Toshiba 43nm:open ignore erase&program and change pattern;
2update Toshiba 43nm isp code;
 ps:
   level04: for G-Tek DG Flash will be better(is level12 change pattern);
   level09: is just for Toshiba 43nm.
2008.12.16
1. support toshiba 43nm DG flash in Level 9;
2. add  level 01 for more stick test pattern for Hopestar.

Ps: Level 10:  Write 2plane; read 1plane
    Llevel 11:  write/read 1plane
    Level 12:  page compare + block compare.
    Level 100: refer the original bad, 1 plane
    Level 90: refer the original bad , 2plane


2008.06.25
  1.Modify Clock Setting in DBF file
    *divide 0x180 bit5 write clock by 2
    *divide 0x181 bit6 read clock by 2
    *divide 0x180 bit6 read clock by 2
2.Modify Pattern Level 7, which is faster flash initialization than Level 11


2008.06.10
  1. Improve scan performance
  2. Improve yield rate
  3. Update flash test pattern LV8, LV9, and LV10
  4. Default set to LV10

2008.05.15
  1. Add Level 100

2009.05.09

  1. Improve Stability
  2. Update DBF table

2008.02.27
  Here are the update and release note:
  1. Update ISP to align with latest ISP(G1228)
  2. Improve Fast Flash Initialization
  3. Modify LED display 
  4. Update Flash test pattern Level 11, 12, 13

